Wind uplifts are a common issue that affects standing seam metal roofs that are not properly designed or installed to be resilient against high winds.

Knowledgeable metal roofers in Texas understand wind uplifts as dangerous upward-lifting pressure occurring in high-wind regions that can cause serious damage to these types of roofs.

To protect a standing seam roof against destructive wind uplifts and ensure its safety and longevity, homeowners must rely on the expertise of metal roofer services qualified to design a system that is strong enough to withstand these unusual wind forces.

What Are Wind Uplifts on Roofs and What Causes Them?

Wind uplifts are upward pressures on standing seam metal roofs that pull the panels upward from the center and away from the decking as well as the support structure beneath them.

They are caused by natural suction pressure that occurs as winds blow over a roof, following its aerodynamic contours and then creating a vortex as they blow over the ridge.

When combined with mini-vortexes that can happen around the edges of the panels and blow under them, wind uplifts can be extremely damaging.

Metal roofers experienced with this problem find that it only occurs with standing seam metal roofs due to their design, which uses seams that join the panels together without the need to screw them onto the decking.

Metal roofer services find wind uplifts to be of most concern in regions that experience frequent high winds and hurricanes, on taller homes and buildings that are more affected by strong winds, or due to poor metal roof design.

What Damage Do Metal Roofers Attribute To Wind Uplifts?

The damage caused by wind uplifts to metal roofs is very characteristic and relatively easy for roofers to identify:

Panel Deflection - Strong wind uplifts can cause panel deflection, which is the upward lifting of the panels due to negative pressure affecting their top surfaces and positive pressure acting on their undersides.
Clip Failure and Panel Separation - Extreme deflection can cause panel clips to break off, further reducing the panel’s ability to withstand uplifts. In severe cases, affected panels may separate from each other.
Severe Panel Damage - Panels with clip failure or ones that have started to separate may experience additional damage to the point of being bent or even completely pulled off the roof.
Decreased Roof Longevity - Metal roofers often find secondary damage caused by wind uplift due to the overall loosening of the system and its durability as well as waterproof qualities being compromised. This can shorten the life of a standing seam roof, making replacement necessary sooner than expected.

How Do Metal Roofers Prevent Damage From Wind Uplifts?

To prevent damage due to wind uplifts, metal roofer services make these crucial recommendations:

Research Wind Test Ratings - As there are several types and grades of metal used for standing seam roofs, it is essential to look at wind test ratings when planning a roof installation in regions noted for receiving high winds. The sturdier and more wind-resistant the panels are, the less they will deflect to uplift pressure.
Buy High-Quality Materials - A high-quality metal roofing system produced by a respected manufacturer will be well-designed to resist wind uplifts as well as other damage and come with warranties guaranteeing product quality.
Consider Rib and Clip Spacing - Both rib and clip spacing can affect how well a standing seam system withstands wind uplifts. When more support is needed, look for panels with the ribs closer together and install more clips accordingly.
Hire A Qualified Contractor - Due to the complex nature of designing a durable standing seam metal roof that can withstand wind uplifts and other common problems, it is essential to hire a metal roofer who is well-trained with these systems and can properly design as well as install them.

A Qualified Metal Roofer Is Invaluable To Install A Metal Roof

In regions that experience high winds and powerful storms, standing seam metal roofs may be affected by damaging wind uplifts.

Fortunately, one that is properly designed and installed by a certified, experienced metal roofing service can be one of the most resilient roofs for dealing with this problem.

Call (979) 432-7978

Metal Roofs in Sugarland Texas

What Are Wind Uplifts on Roofs and What Causes Them?

What Damage Do Metal Roofers Attribute To Wind Uplifts?

How Do Metal Roofers Prevent Damage From Wind Uplifts?

A Qualified Metal Roofer Is Invaluable To Install A Metal Roof

Need Metal Roofers in Sugar Land Texas?

Talk To Mister Re-Roof About Your Metal Roof Installation!

Call 979-432-7978 To Arrange A Metal Roof Consultation!

Hiring A Roofer For Your Home Can be Stressful

Clear Upfront Pricing

How to Get Started

Connect With Us

Get A Custom Plan

Enjoy Peace of Mind

Our Roofing & Exterior Services

Roof Repair and Replacement

Roof Repair and Replacement

Roof Restoration

Roof Restoration

Roof Cleaning

Roof Cleaning

Gutters

Gutters

Siding

Siding

Windows

Windows

Latest Projects

Latest News

What Are the Right Roof Vents For Your Home?

Why Roofing Maintenance Services Are Crucial for Your Home!

Advice From Commercial Roofers – Get Your Roof Inspected!

Roof Damage – Different Types and How Roofers Fix Them!

Is It Time – Do You Need To Replace Your Metal Roof?

Shingle Roofs – Should I Install New Shingles Over Old Ones?

Contact Us

Resources

Services

Southwest Houston’s First Choice for Roofing Excellence